Publish Time: 2022-04-20 Origin: Site
Compound rope refers to the flexible rope twisted with multiple or multiple strands of fine steel wire, it is twisted by multiple layers of steel wire into strands, and then the core of the rope as the center, by a certain number of strands twisted around into a spiral rope. In the material handling machinery work, for lifting, traction, tensioning, and load-bearing purposes. Compound rope's high strength, light self-weight, smooth work, not easy to suddenly break the whole, safe and reliable. Here to see the specific content.
Here is the content list:
Compound rope uses basic requirements.
Maintenance of Compound rope.
1. Must check whether the compound rope is damaged before use.
2. Compound rope shall not have sharp zigzag, ring, jumping wire, or smash flat and other defects.
3. The end of the rope is knotted into a rope set, at least three cards, if the knotting method is used, the length of its knotted part is not less than 15 times the diameter of the wire rope, but the shortest is not less than 300mm.
4. Rope is strictly prohibited with knotting method connection, winch with compound rope shall not have joint.
5. Use such as the discovery of oil phenomenon (new rope exception) that indicates that the compound rope deformation is very big, should immediately stop working, check to process.
6. The rope should often keep clean, generally dip oil once a year, oil with wire rope oil or cylinder oil, etc. (oil temperature shall not exceed 80℃);
7. Hoist molten metal (steel, iron water package) compound rope, rope core should be natural material (asbestos or soft metal made) steel, iron water package should be placed on the heat insulation baffle, to avoid compound rope heat.
8. Bundle with compound rope, when encountering sharp-edged objects should be well padded, keep the balance of hanging objects, hot metal cannot bundle.
1. The compound rope should prevent damage, corrosion, or other physical conditions, chemical conditions caused by the performance reduction.
2. When uncoiling, should prevent knotting or twisting.
3. When the rope is cut off, should prevent the rope strands from scattering measures.
4. When installing, should not be dragged in an unclean place, also should not be wound on other objects, should prevent scratching, grinding, crushing, and excessive bending.
5. Compound rope should keep a good lubrication state, the lubricant used should meet the requirements of the rope, and do not affect the appearance check. Lubrication should pay special attention to not be easy to see and not easy to approach the part. Such as balance pulley at the compound rope.
6. When receiving, must check the certificate of conformity of the compound rope to ensure the mechanical properties and specifications meet the design requirements.The daily use of the compound rope should be checked every day, including the fixed connection of the end, the balance pulley at the inspection, and make a safety judgment.
Over the years, Zhejiang Hailun Rope&Net Co., Ltd. strictly control the quality, insist on learning the high and new technology of the rope and cable at home and abroad, continuously set up and grow the scientific research team, overcame the difficulties, and pursue prolonging the service life of the rope and cable.